操作及維護說明書-中英對照版
承包商應提供六份成套設備的操作及維護說明。每份說明書都必須使用塑料或其他審核通過的封面裝訂好。
在安裝工作開始之前，承包商應為工程師提供兩份說明書的草稿給工程師審批，并在最終版的說明書印刷之前將工程師提出的修改及增補內容考慮在內。
說明書應包括以下內容：
i)完整而詳盡的設備操作說明書。說明書必須專門針對合同中所指定設備而編制，不得使用制造商對通用設備的一般說明書。
ii)詳盡的設備維護說明，圖表等，包括拆卸維修以及每日，每月，每年的維護保養計劃。
iii)制造商關于設備零部件的指示宣傳單，包括：儀器，配電盤組件以及其他專業設備。
iv)所有設備的綜合部件清單。
v)記錄所有批準完成的工程圖紙的拷貝件。
vi)特別提出以下幾點：
·控制設備輸出量的方法，
·基于流量要求，控制原水泵站流出量的方法，
·所使用的輪滑油類型，
·更換任何記錄設備的圖表，
·保留好記錄。
在遞交完成六份最終的說明書后方可頒發操作許可證書，僅第(v)部分圖紙除外，允許在操作許可證書頒發后的六周內提交圖紙。
2.16買方人員培訓
在工程師頒發工程的操作許可證書之前，PPWSA（金邊供水管理局）應組織為期一個月的指導（培訓）。這段時期內，承包商應就工程運行及維護的方方面面對買方的人員進行培訓。由一位合格的導師進行培訓，培訓每周5天，每天8小時。必須將培訓項目交給工程師審批。
人員培訓在入口處進行。
2.17管路、纜線及結構等安全措施
承包商應負責通過使用臨時或長期的支架支撐保護器材，否則所有的管路，纜線，地面排水溝，結構或其他物品在沒有適當?shù)姆雷o(hù)措施保護下很容易遭到破壞。
臨時或長期的安全防護措施應得到業主和工程師的審批同意。
2.18運動機械的防護
所有運動的機械都必須要恰當?shù)姆雷o(hù)，以防意外接觸而造成傷害。特別是曝露在外的軸承和耦合器，應使用適當?shù)姆雷o(hù)裝置保護起來，一般情況下無法接觸到的部位除外。
2.19標牌、銘牌及標簽
必須在每臺設備的適當部位附上標牌，使用耐久性材料刻上識別名稱，類型或是序列號，以及進行指定操作時須注意的荷載條件等詳細要求。
每臺設備都必須有銘牌或者具體項目的等級設定。銘牌內容必須得到工程師的審批。
所有的配點盤間都應用標簽清楚標明其功能，并標出每臺儀器的指示，控制功能。標簽的類型及內容都必須得到工程師的審批。
所有的標牌，銘牌及標簽都必須使用英語。
2.20設備的運輸及存儲
2.20.1包裝與標記
在從生產國對外出口時，所有設備都應按照國際標準進行包裝與標記。所有的木箱都必須使用適當?shù)姆腊紫伻芤航荨２坏檬褂媒斩捇蝾愃朴袡C(jī)材料包裝。
所有遇水或潮濕容易變質的材料都必須使用防水的襯料包裝好后存放至箱內。
Operation and Maintenance instruction
Contractor shall provide six copies of complete sets of equipment operation and maintenance instructions. Each instruction shall use plastic or other approved cover binding.
Before the start of the installation work, contractor shall provide two copies of the draft specification for the engineer to engineer examination and approval before the final version of the manual printing to engineers, so as to modify and supplement content into account.
Instruction manual shall include the following contents:
I) Complete and detailed equipment operation instructions. Instructions shall be specifically for specified in the contract equipment and establishment; manufacturer shall not be used for general equipment general specification.
Ii) Detailed maintenance instructions, diagrams shall include disassembly maintenance as well as the daily, monthly and yearly maintenance plan.
Iii) Manufacturers instructions flyer about equipment parts, including: equipment, switchboard components and other professional equipment.
Iv) Composite parts list of all equipment.
V) Records all a copy of approval to complete the engineering drawings.
Vi) Especially put forward the following:
Output method, control equipment,
Raw water pumping station, based on the requirement of flow, control outflow method,
Roller skating, use oil type,
Chart, replace any recording equipment,
Keep good records.
Submit completed six copies of the final specification rear can Operation license certificate, except the first part (v) drawings, only allowed within six weeks after Operation license issued submitted drawings.
2.16 Buyer's personnel training
Before the engineer project operation license certificate, produces (phnom penh water supply authority) shall organize a month-long guidance (training). Within this period, the contractor shall be the aspect of the project operation and maintenance in the face of the buyer's personnel training. Qualified teacher shall training for 5 days a week, 8 hours a day at least. It is required that the training programs shall submit to the engineer for approval.
Staff training at the entrance
2.17 Line, cable, structure safety measures
Contractor shall be responsible for through the use of temporary or long-term brace protection equipment, all line, cable, floor drain, structures or other items in the absence of appropriate protective measures to protect the damaged easily.
Temporary or long-term safety protection measures shall be the owner and the engineer's approval.
2.18 Mechanical protection
All of the mechanical movement shall be appropriate protection, to prevent accidental exposure and damage. Especially the exposure of the bearing and coupler shall use appropriate protective equipment to protect, unless it is usually unable to gain access to the site.
2.19 Sign, plaque, and labels
Attach a sign at proper positions of each device, the durability of materials used on the name on the identification, type or serial number, and shall pay attention to when specified Operation conditions of load and other detailed requirements.
Each device shall have a nameplate or specific project level Settings. Content of the nameplate shall obtain the approval by the engineer.
All the match point between disc apply labels made clear its function, and each instrument's instructions, control function. The type of label and content shall be get the approval by the engineer.
All the signs, nameplates and labels shall be in English.
2.20 Equipment, transport and storage
2.20.1 Packaging and tag
All equipment shall be carried out in accordance with the international standard packaging and tag from producers to export. All the wooden cases shall use the proper solution soak for the termite. Straw or similar organic materials shall be used for packing.
All of the material is apt to deteriorate in water or damp shall use waterproof lining after deposit to box packaging.
2014.6.9